Let’s be honest. Nobody dreams about their laundry. You dream about a kitchen island or a fancy ensuite, and the laundry gets whatever’s left over: a cracked tub, a wonky cupboard and a basket of socks that lost their partners years ago.
But here’s the thing. You use it every single week. And once you start poking around, the question hits fast: what will a laundry renovation cost in Illawarra?
I’m Modern View Constructions, and I get asked this one a lot. So here’s the short answer. Across Australia, most laundry renovations land between $5,000 and $25,000, according to Canstar’s guide. For most Illawarra homes, I’d plan on roughly $6,000 to $12,000 for a solid mid-range job, and well over $20,000 if you move plumbing or go fully custom.
That’s a big spread, I know. The rest of this guide shows you where the money goes, what’s different about building around Wollongong, Shellharbour and Kiama, and how to keep the final bill from surprising you.
Laundry renovation cost in Illawarra at a glance
Think of a laundry reno like ordering a coffee. A flat white and a triple-shot caramel oat latte both count as “coffee”, but the bill is very different. Here’s how I’d group the jobs.
| Type of job | Typical cost (Illawarra, 2026) | Time on site | What you get |
| Cosmetic refresh | $3,000 – $6,000 | 3–6 days | New paint, tub or sink, taps, flooring. Existing cabinets stay. |
| Mid-range renovation | $6,000 – $12,000 | 1–2 weeks | New cabinets, benchtop, splashback tiles, flooring, tapware. Plumbing stays put. |
| Full renovation | $12,000 – $20,000 | 2–3 weeks | Everything above, plus new waterproofing, wall repairs, lighting and extra storage. |
| Premium or relocated | $20,000 – $30,000+ | 3–6 weeks | Plumbing moved, stone benchtop, full-height joinery, integrated appliances. |
These are my planning ranges for the Illawarra, built from published Australian and NSW guides and adjusted for local trade rates. They’re a starting point, not a quote. Your home, layout and finishes will move the number.
For comparison, a NSW cost guide from The Quote Yard puts a simple cosmetic refresh at about $2,500 to $5,500. And a CO-architecture 2026 guide says Australian laundries run from around $3,000 for a refresh to $30,000 or more when plumbing moves or the room is reconfigured. My ranges sit comfortably inside both.
What drives your laundry renovation cost?
If I had to pick one thing, it’d be plumbing. Not the size of the room, not the colour of the tiles. Plumbing. CO-architecture says the same thing: the existing plumbing layout usually matters more to the price than the size of the room.
Here’s why. Keep your tub, washing machine taps and floor waste where they are, and a plumber just swaps fittings. Move them to the other wall and suddenly you’ve got cutting, new pipework, a new drain and often a repaired slab or floor. That’s where $3,000 can quietly become $8,000.
The other big levers look like this:
- Size and layout. A tiny 2m x 2m laundry costs less to tile and fit out. But you’ll pay for clever storage to make it work.
- Cabinetry. Flat-pack from a hardware store is cheap. Custom joinery with soft-close drawers and a broom cupboard costs more, and honestly, it’s often worth it.
- Benchtop. Laminate is the budget pick. Engineered stone or timber looks beautiful but adds a few thousand.
- Tiles. Big-format tiles lay faster. Tiny mosaics look gorgeous and take forever, which means more labour on the bill.
- Appliances. If you’re buying a new washer and dryer, budget for them separately. A good pair can run well into the thousands.
- The state of the room. Rotten wall lining, old tiles stuck on with something mysterious, or damp behind the tub? You won’t know until we open it up.
A simple rule I like: match your laundry to the rest of the house. If your kitchen is modest, a marble-topped laundry will look odd. Canstar makes a similar point in its laundry renovation guide.
Where the money goes: laundry renovation cost by item
A lump-sum quote is easier to trust when you can see what’s inside it. Here’s a rough breakdown of the main pieces.
| Item | Typical allowance | Worth knowing |
| Demolition and removal | $500 – $2,000 | Costs more if old lining or asbestos shows up in an older home. |
| Plumbing (tub, taps, waste) | $1,000 – $3,000 | Licensed plumber only. Moving pipes pushes this up fast. |
| Waterproofing | $500 – $1,500 | Laundries count as wet areas. Don’t skimp here. |
| Cabinetry and benchtop | $2,000 – $8,000 | Flat-pack sits low, custom joinery sits high. |
| Sink and tapware | $300 – $1,500+ | A deep laundry tub earns its keep. |
| Tiling (floor and splashback) | $800 – $3,000 | Depends on tile size and how much wall you cover. |
| Electrical and lighting | $300 – $1,200 | Extra power points, LED lights, a rangehood-style fan. |
| Ventilation | $300 – $800+ | Cheap insurance against mould. |
| Painting | $400 – $1,200 | Use a moisture-resistant paint. |
Allowances are indicative planning figures. Several come from published 2026 guides, including The Quote Yard and CO-architecture. Some of those are Victorian or national numbers, so treat them as a guide and not a local price list. Tiling, electrical and painting are my own allowances.
Why Illawarra laundry renovations are a little different
Building between the escarpment and the sea has its quirks. I’d say these four matter most.
1. Older homes hide surprises. Think fibro cottages in Port Kembla, weatherboards in Thirroul, brick veneers from the 70s in Dapto. A lot of these laundries were tacked on later, sometimes with a slab that slopes the wrong way and a drain that was a creative decision. Opening up the wall can reveal rot, termite damage or old lining. Pre-1990 homes can also contain asbestos, so testing before demolition is a must.
2. Salt and damp. Coastal air is hard on cabinets, hinges and tapware. For suburbs near the water, I’d pick marine-grade or moisture-resistant boards, stainless or quality chrome fittings and a proper exhaust fan. It costs a little more up front and saves a lot later.
3. Trade rates sit between regional and Sydney. Cost guides for Wollongong note that Illawarra trade rates sit below Sydney’s, but the gap has narrowed, because many local trades also work the southern Sydney market. That guide covers bathrooms, but the same logic applies to laundries. So don’t expect country prices.
4. Access and logistics. Steep blocks around Wollongong, Bulli and Kiama can make delivering a benchtop or removing an old tub more work than you’d think. A good builder will tell you that up front.
Here’s a quick story. A homeowner I’ll call Sam wanted a “quick” $4,000 laundry refresh in an older coastal cottage. Once the old tub came out, the wall lining behind it was soft and the floor needed patching. The job grew, but because we’d talked about a contingency at the start, there were no nasty shocks. (Illustrative example. Swap in a real Modern View job and photos here.)
Hidden costs and NSW rules that affect your quote
This is the boring bit. It’s also the bit that saves you the most stress, so stay with me.
Hidden costs to ask about:
- Asbestos testing and removal in older homes
- Rotten wall lining, floor repairs or termite damage found after demolition
- Moving the electrical switchboard or adding circuits
- Skip bin hire and rubbish removal
- Council or strata fees, if you live in a unit
- Delivery of long benchtops to a steep or tricky block
NSW rules worth knowing:
- Licences matter. Plumbing, electrical and waterproofing work should be done by licensed tradespeople. You can check any licence on the NSW Fair Trading website.
- Written contracts. In NSW, residential building work over $5,000 needs a written contract. It should list the price, the scope and how variations are handled.
- Deposits. There’s a legal cap on the deposit a builder can ask for, which is 10% of the contract price.
- Home warranty insurance. Jobs over $20,000 (including GST) need home building compensation cover. Ask to see the certificate.
- Approvals. Most internal laundry renovations don’t need a development application, but changes to structure, external walls or a heritage-listed home might. Check with your council or ask your builder.
Rules can change, so always confirm the current requirements with NSW Fair Trading or your council before you sign anything. I’m a builder, not a lawyer.
How to save money on your laundry renovation (without cutting corners)
I love a good bargain. I don’t love a laundry that leaks into the hallway six months later. So here’s where saving makes sense, and where it doesn’t.
Smart savings:
- Keep the plumbing where it is. This is the biggest single saving, by far.
- Keep the layout. Swap the cabinets and benchtop, but leave the walls and drains alone.
- Choose laminate or a quality engineered top instead of natural stone.
- Buy your own appliances during a sale, then give your builder the specs early.
- Go for standard tile sizes. Fewer cuts means less labour.
- Get three quotes on the same scope. Compare line by line, not just the total.
Don’t save here:
- Waterproofing. A leak behind the wall is a very expensive hobby.
- Ventilation. Damp air means mould, and mould doesn’t pay rent.
- Licensed trades. If something goes wrong, you want paperwork and insurance on your side.
Finally, set aside a contingency of 10% to 15%. If you don’t use it, lovely. Spend it on a nicer tap. If you do need it, you’ll be glad it’s there.
Laundry renovation cost Illawarra: your questions answered
How much does a basic laundry renovation cost in Illawarra? A simple refresh with paint, a new tub, taps and flooring usually sits around $3,000 to $6,000. Replace the cabinets and benchtop too and you’re looking at $6,000 to $12,000.
How long does a laundry renovation take? A refresh can take 3 to 6 days. A mid-range job is usually 1 to 2 weeks, and a full or relocated laundry can run 3 to 6 weeks, mostly because trades have to work in order (plumber, waterproofer, tiler, then cabinets).
Can I do some of it myself to save money? Yes, with limits. Painting, demolition prep and installing your own appliances are common DIY jobs. Plumbing, electrical and waterproofing must be done by licensed trades in NSW.
Do I need council approval to renovate my laundry? Usually not for an internal refit, but it depends on whether walls, structure or heritage rules are involved. Check with your local council (Wollongong, Shellharbour or Kiama) first.
Is a European laundry cheaper? Often, yes. A cupboard-style laundry hides the machines behind doors. The Quote Yard’s Victorian guide puts these at about $4,000 to $12,000, depending on the fit-out.
How do I get an accurate quote? Book an on-site visit. Photos help, but nothing beats someone looking at your plumbing, walls and floor. Ask for a written, itemised quote.
So, what will your laundry renovation cost?
Here’s the quick recap on laundry renovation cost Illawarra homeowners should plan for:
- $3,000 to $6,000 for a cosmetic refresh
- $6,000 to $12,000 for a solid mid-range renovation
- $12,000 to $20,000 for a full renovation with waterproofing and repairs
- $20,000 to $30,000+ when plumbing moves or you go premium
Plumbing, cabinetry and the age of your home do most of the damage to the budget. Keep the layout, protect the waterproofing, and set aside 10% to 15% for surprises.
Ready to put a real number on it? Modern View Constructions offers a free on-site quote across Wollongong, Shellharbour, Kiama and the wider Illawarra. Tell us what you’ve got, and we’ll show you where the money goes.